Place the cursor on the word “here” to make sure you’re at the right location. The Button Assignments dialog box will open see Figure 1. Wasn’t that done by specifying the drawing area during set up? Up 0 Down Reject Answer Cancel. Calcomp will not support Vtablet with the usb information.

Uploader: Mujin
Date Added: 7 February 2014
File Size: 29.26 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 49191
Price: Free* [*Free Regsitration Required]

If you are seeing a break or stair step in the line, an indication of a dead grid, call GTCO CalComp Technical Support at one of the dalcomp listed at the bottom of this page.

Calcomp Wintab Driver

Installation Notes Before you install the CalComp tablet, a mouse must be connected to the computer. You can use the TCU on your own to troubleshoot digitizer problems or configure your tablet, or your Technical Support specialist may ask you to load it to assist him or her when diagnosing problems.

Posted December 21, David I’m using the wintab driver with 2 screens, and have no problem going across them. Driver instructions for Calcomp Drawingboard 2,3,4,5,6.

You can find it in the “Microstation” directory. Sign up for a new account in our community. Winntab a device is found and a service is not loaded, the operating system will sometimes disable the serial port.


Double-click on the filename to begin the TCU installation. It is possible that you could leave the tablet turned on, as some newer tablets with a Plug and Play BIOS will not cause the port to be disabled. What are you waiting for? Has anyone else encountered this problem and know of a solution?

Calcomp Wintab Driver – MicroStation Forum – MicroStation – Bentley Communities

Delete any other Wintab files the search finds. I’m trying to get this to work since the button mapping isn’t configuring on the tabletworks setup with the 16buttons. DLL, which should both be in the. Click on the Test Program link.

Tablet Configuration Utilities – GTCO

MicroStation file access issues with shared network drives. The test utilities identify the primary origins of system failure.

Use it to customize the output format for use with non-Wintab-compliant applications. Moving wimtab pen stylus or cursor on the digitizer moves the mouse pointer on the screen. Wintab Driver – Most digitizing software uses the wintab driver to communicate with the digitizer. You need to be wingab member in order to leave a comment. Search For Wintab — Choose this option to search your system for Wintab drivers.

The digitizing software then uses the wintab driver to trace objects or points into the computer. Using the Tablet Configuration Utilities. Logic Trace Digitizing System. The Logic Group digitizing software can be used with or without the windows wintab driver, other vender software will generally require the windows driver.


Bentley Tablet Driver And CalComp DrawingBoard

Follow the onscreen prompts to complete the installation. Attach the pointer to the digitizer, the serial cable to the digitizer and to the computer or the serial to usb adapterthe power supply to the digitizer and wall output, turn the digitizer on, the tablet should beep and green light come on.

If you could digitize previously but cannot now, check the serial to usb com port as mentioned in step 1. Installation without the Wintab Driver 1.

Nothing of any use to you on it. In the middle is a button that displays green when the cursor is in prox. When the program is finished, restart the computer.